Duratrax Piranha Digital Peak Charger
i have a Piranha digital peak charger from duratrax can someone tell me what do set the peak detection?
Q: What should be the peak threshold detection sensitivity to be attached to a battery of 3000 mAh and 3300mAh battery and they are both Nimh. there is a choice of 3 mV to 20 mV for putting too.
A: Ni-MH you must set the maximum sensitivity to 8mV. NiCads have a voltage drop higher when peak NiCads therefore set at 6 MV is this duratraxx recommends. Check out my concern is the manual for this charger.
